They can actually hit the box with style since they ride is less catchy. The less-catchy nature of rocker allows them to initiate their spins early and gives them greater ability to recover more easily from off-axis landings. Everyone can ride a rocketed board and nearly everyone should!!
That's the beautiful thing about rocker technology. Rider can be a beginner or advanced, young or old, and benefit from riding rocker. Hole-patterns assign to the round, threaded metal insert holes that every snowboard features to secure rider bindings to the board. It can be nice to know the difference between the hole-patterns if they are looking for that perfect position that provides optimal comfort. These holes can be arranged in multiple orientations. There are a handful of different hole-patterns that snowboard manufacturers use most.
Each style of hole-pattern has their pros and cons and they should all be considered when shopping for a new board. This is a tried-and-true insert construction and offers a moderate amount of stance opportunities. This insert arrangement works with almost all binding disc designs with a few exceptions. This design offers more holes placed upright on the board, which are all spaced an equal two centimeters apart.
This is a great option for someone looking to be able to make some minuscule adjustments to their stance setup. This position arrangement is found on the majority of boards today and works with almost all binding disc designs with a few exceptions. An important note: if riders buy a Burton board, keep in mind that they might need to buy specific Burton bindings with the proper disc to fit the unique hole-patterns as well.
Other manufacture may also produce Burton compatible binding inserts to accommodate rider setup selection. Sliders A few different manufactures have offered a sliding insert system over the years with the same goal in mind.
The goal is to have the most freedom possible when choosing a stance setup. Other manufactures may also produce Burton compatible binding inserts to accommodate rider setup selection. Flex Soft Flex Softer flexing snowboards typically freestyle and some all mountain boards are going to be very merciful and easier to turn.
A soft flex is good for beginners, riders with lower body weights and park riders. Soft snowboards tend to be a bit looser at higher speeds but can also provide a soft creamy feel at slower speeds. Stiff Flex Stiffer flexing snowboards are usually built for free ride or backcountry use.
They provide better edge hold and are more stable at high speeds. Stiff boards can be great for riders laying down high speed turns but tough for lightweight riders to flex properly. Turning Ability Snowboards make different sized turns based on their radial cut, waist width and rocker. Sidecut Radius Sidecut radius is the radius rider board would create if the edge was extended out into a complete circle. Smaller numbers in the sidecut radius indicate a smaller circle.
Imagine a smaller circle vs. Waist Width The waist width is the width of the snowboard at its most narrow point. It is usually measured in millimeters. Narrow waist widths can be rolled from edge to edge faster than wider snowboards.
Snowboards are designed to be ridden with rider toes and heels very close to the edge of the board so that that can apply pressure to roll the snowboard from edge to edge. Durability and Price Range Price is always a consideration when shopping.
At M2 Sports are very selective of the snowboards for sell. There are lower cost boards out there but they often lack the quality materials, such as wood cores, proprietary design elements and other performance attractive features that rider will find in the snowboards available at M2 Sports.
These elements enhance the performance and add to the durability and ride-ability of a snowboard. If rider plan to ride their snowboard for multiple seasons consider spending a little more money for quality and durability. Core Material - This is the material that makes up the middle of rider snowboard.
Normally, core material is wood or a mixture of different types of wood. Foam and certain other materials can also be found in snowboard cores. Effective Edge - The edge length of the snowboard that actually makes contact with the snow when the snowboard is on edge during a turn is mention to as the effective edge.
The effective edge is shorter than the snowboard length. A longer effective edge will add stability and a shorter effective edge makes rider snowboard feel looser and easier to turn. Extruded Base - Extruded snowboard bases are made from polyethylene often called P-Tex. The term extruded refers to the process of heating and melting the material in the manufacture process. Extruding P-Tex is relatively inexpensive. These bases do not hold wax as well as sintered bases, and so they can be slower than a well-tuned sintered base.
But, an extruded base can perform better than an unwaxed sintered base. Extruded bases have great natural fly. Extruded bases are typically less expensive; more easily repaired and require less waxing than sintered bases. Serrated edges are designed to cut into the snow like a knife and give rider more edge hold and control than non-serrated edges. Sidecut Radius - Sidecut radius is the radius rider board would create if the edge was extended out into a complete circle.
Sintered Base - Sintered snowboard bases are designed for super-fast glide. Like extruded bases, sintered bases are made from polyethylene P-Tex. But unlike extruded bases, sintered bases are shaped by super compression as opposed to heating and melting.
Sintered bases are very absorbent and absorb wax very well. As a result, sintered bases are much faster than extruded bases when waxed regularly. Often extra materials such as Gallium, graphite or Indium are added to the bases to provide increased impact resistance, durability and glide. Sintered bases are normally more expensive and can be more difficult to repair than extruded bases. Often the tail is flatter than the tip and is more squarely cut. Some alpine boards have a split in the tail to give more turning power and coordination in high speed turns.
Freestyle boards will often have similar tips and noses to make it easier to ride "fakie" with the front foot in the back. The length of board from the widest part of the board's tail to the tip of the tail is mention to as the tail length. The widest part of the board measured across the tail's tip or tail area of the board is the tail width.
Opposite of the base, the top or deck of the board is where the bindings are mounted and the rider stands. Most boards have mounting holes in the deck where the bindings can be screwed into. Place the holes enable rider to connect their bindings to their board at different angles or stances. Waist width is the narrowest point of the board.
This is typically the middle of the sidecut, located between the bindings. Waist width of a board should be relative to the size of rider feet. Boards with a narrow waist width are quicker from edge to edge, but if rider feet are size 11 or more they will most likely require a wider board. Otherwise, their toes may hang over the edge and cause toe drag, which will slow their down. By sharing a bit of information, we hope to answer all of your questions.
Advice and general guides can be found below for sizing a snowboard, choosing the right boots, and picking out the perfect bindings. This is no doubt the most commonly asked question in any shop. First of all, it is important to consider their weight, height, and riding style when choosing a new board. Yes and no. Some advanced free ride snowboarders use longer and stiffer boards which take more muscle and ability to control.
This sounds alike to a beginner style board, but advanced freestyle riders use them for a whole other reason. To sum it up, anybody can use any board they like. It is all a matter of finding the best fit for them and their type of riding. A regular stance refers to riders who ride with their left foot forward.
Goofy riders ride with their right foot forward. There are a few different tricks that can do to help determine rider stance. One very common and sort of fun trick to figure out rider preferred stance, is to run and slide on a smooth surface in their socks to see which foot they put forward. The foot they place forward is most likely going to work best as their lead leg on a snowboard. Another common trick to explain if rider will regular or goofy is to have someone gently push their backwards from their chest and see which foot they naturally place behind for their support.
In this case, the foot they place behind them self could work best for their rear leg. In general, rider stance should be as wide as or a bit wider than their shoulder width. If they are someone who likes to ride hit big kickers and huck like mad, adding an extra bit of width to their stance may be helpful when trying to maintain control in the air and when stomping tough landings.
A common mistake is to have too narrow of a stance. Having a stance width less than rider shoulder width will reduce their ability to balance. Too narrow of a stance can also make turning and controlling their board more difficult. Keep it simple and just find a width that is comfortable. Lay your board flat on the ground and stand on it.
Adjust rider stance by spreading their feet to a point where they feel comfortable and have a solid balance over the board. Now slap those bindings on and test it out, they can always make adjustments. Whether riders are a fresh-legged beginner or a shred-expert, board tuning is important when trying to keep board in good shape. Tuning a snowboard also helps the board perform its best by rising edging capabilities and should be done regularly. It is also regular for freestyle riders to regularly detune or dull their edges to get rid of potential hang-ups such as cuts and burs.
This is ideal for riders who spend a lot of time jibbing. As a guideline, a snowboard should be tuned at least once a year by a professional in a shop. If rider do not know how to tune their board, refer to the How to tune their edges information found in the How-To section.
Snowboard waxing can be done regularly to guarantee the best performance on the snow. A new coat of wax will help give rider snowboard a better glide, making it faster and more responsive. Waxing should be done anytime the base of rider board starts to look dull or dry. There are numerous kinds of wax, all with their own abilities.
Some waxes are made for colder weather, some for warm. There is also all-temperature wax to accommodate most conditions. What is my Skill Level? What is my preferred Riding Style? The Rocker profile between the feet makes the board touch the ground right in its middle. The Ripsaw Rocker Camber profile has deeper camber pockets on the tip and tail for enhanced edge hold, response, stability, precision, and pop, while featuring the same rocker section between the feet as the Original Rocker Camber.
The Ripsaw profile is more aggressive and ideal for a hard charging, while still maintaining forgiveness and float. The tip and tail are turned upward more than the OG Rocker Camber but less than the Ripsaw Rocker Camber, and the Rocker profile gives it that touchpoint to the ground right in the middle of the board. This gives the board a more surfy feel. The Shock Wave Rocker Camber has extended Camber profile zones in the tip and tail and has a decreased Rocker profile between the feet.
This makes the board have fewer touch points to the ground than the above profiles, giving it more edge hold, response, and pop. The Touring Ripsaw Rocker Camber is utilized for backcountry touring. It provides greater traction for the ascent while maintaining the effectiveness of Rocker Camber on the descent. Game changing innovation.
The center rocker of our patented Rocker Camber profile is now a third camber area flanked by two small rockers. The result is a completely balanced ride not found in any other profile. Triple Camber makes the most efficient use of your entire edge. The primary edge hold starts from the center of the board. The overall Rocker Camber shape retains the playful and forgiving feel.
Balanced vice-like edge hold, rocket launching pop, and insane butterability. Game changed. For example, for freestyle riding a shorter board helps for being easier to do spin tricks, get up on rails or rotate in the air. Or for a beginner a board too long is hard to control, a shorter board is a little easier to learn on.
Whereas, for freeriding a longer board has greater stability at speed. Or our volume or shaped boards can be sized up or down, depending on the model.
You want something that comes around your chest to chin. Your boot size tells you how wide you need your board to be. You want a board that is proportionate to your boot size. The larger your feet, the wider board you need, and with a smaller foot a narrower board is more beneficial.
A narrower board has an easier turn initiation and maneuverability. Using height, weight, and shoe size ensures you get on the best board for you, combining the most comfortable board for your size, with the flexibility to try different things on the mountain. Longer boards are perfect for freeriding because you can float in powder at a stable speed without feeling the bounce of a shorter board.
Getting the proper setup for your board requires the right stance, bindings, and boots. Your stance is how you stand on your board and there are 2 types of stances to choose from, either a Regular Stance or a Goofy Stance.
Nate is passionate about and loves learning new things everyday about snowboarding, particularly the technical aspects of snowboarding gear. That, and becoming a better rider and just enjoying and getting the most out of life. More Details. Just one more thing to do. Simply go to your inbox and you will find an email:. Simply click the "Confirm My Email" link in that email to confirm your email address.
The Right Gear for the Perfect Ride. Snowboard technology over the years have left this technique obsolete and there a few factors that influence the length of a board, namely: Weight Riding Style Ability Level; and Height Weight Weight is the most important factor in determining the length of the board — the weight of the rider , is certainly more important than the height of the rider. Why is weight the most important factor? Snowboard Brand. Ability Level The ability level of the rider can also influence the length of the board.
Figuring out your Riding Style Height Whilst definitely not as important as weight, height is still somewhat of a factor — partly because a taller rider will weigh more than a shorter rider with the same build. The Length Charts The tables below show estimates for board length based on height and weight. What Next?
Any other comments or questions always welcome too. Share 0. Tweet 0. Most snowboarders are versatile creatures of winter and explore all that the mountain has to offer. If you decide you want to take a few laps in the park before winding your way through some woods runs, you might just be an all-mountain maniac. For the curious adventurers of all that is shred, this is definitely your category. The all-mountain board type is meant to accommodate all you can throw at it.
Take it off jumps in the park, have fun in the pipe, blaze groomers, and even get buried in a fresh dumping of powder. These things do it all well. Snowboards that fall under the all-mountain board type can have various board shapes and camber profiles.
Find your favorite combination and get after it. This board type is also a great category for beginners to start with. The all-mountain versatility will allow you to ride anything you want until you find a type of riding that you do most. Shop All-Mountain Snowboards. For the pipe jerks, park rats and back-alley street cats, your riding style falls into the freestyle category. If you spend more time on tow-ropes and handrails than you do on the chairlift, your riding style is certainly freestyle.
Sure freestyle snowboarders can do it all, but their main focus is to progress in the park, pipe and street and they do that with a freestyle oriented deck. Freestyle snowboards are usually sized-down a bit from your average length deck and contain a bit more flex. The shorter size allows you to throw the board around easier when performing tricks.
And a softer flex will allow you to tweak those tricks for proper style and steez. These boards are often built with a badass base and some hardcore edges to withstand daily park-induced punishment.
Freestyle boards have a true twin shape and can have a range of camber styles such as flat, traditional, rocker, or a combination. This is another board type often used by beginners because of the low weight and forgiving flex of the board. The smaller board allows beginners to gain control of the board and its edges easier and quicker.
The freeride riding style category encompasses riding from blazing groomers to plowing through a pile of pow in the backcountry. This riding style is common among riders who are fortunate enough to have legit mountains to ride or happen to get a good amount of snowfall in the area. Freeriding is snowboarding at its core and will always be a huge part of the sport.
Freeride board types are often on the longer end of your board size range. That extra few centimeters makes all the difference for staying atop pillows of pow. Freeride boards are most often directional shaped boards but could also be a directional twin shape. These boards also have a stiffer flex for added response and stability when bombing at high-speeds and slashing deep. The war of skiing verses snowboarding is over.
These people earn their turns by hiking up every inch of what they descend. Anybody who says ski and board bums are lazy has never heard of split-boarding. Splitboards are the type of board for extreme freeriding. Use the skis to climb up and through some newly found terrain, then reattach them together and shred your line back down on a snowboard.
Board shapes will either benefit the rider or hinder a riding depending on what type of terrain is being ridden. Most common among freeride snowboards and sometimes found on all-mountain boards, the directional shape is a non-symmetrical construction designed to be mostly ridden in one direction.
This means that they have a specified nose and tail; each end may differ in stiffness, shape and contact points. Directional boards usually have a stiffer tail than nose to create a stable ride when flying down mountains. Boards that feature this shape also tend to have the binding inserts set back closer to the tail end of the board so your body weight is correctly distributed for a fast and powerful ride through deep pow. Although this shape can be found on just about all board types, true twin dominates the freestyle scene.
True twin, also known as twin tip, means that the tip and tail are identical. The symmetrical shape allows park, pipe, and street riders to perform and land technical switch tricks easier. True twin boards open up a whole new window for freestyle snowboarders. With a nose and tail with the exact same flex patterns and measurements, riders can have complete confidence in their board when riding switch.
Commonly found in all-mountain boards, the directional twin shape is a great all-around board choice. Directional twin consists of a nose and tail that are different in construction. Although the tip and tail might not be exactly the same, riders may ride switch in the park or pipe without noticing any negative effects. Directional twin boards often have a slightly longer nose than tail and could also have a softer nose than tail or a combination of the two.
The added length to the nose gives you an edge when riding powder and a stiffer tail will create more stability when riding at higher speed. Snowboard Profile Shape refers to the base shape of an un-weighted board on a flat surface. Looking at the board from the side and you can roughly decipher what Profile Shape a board has. The information below is to be used as reference to help you decide what Profile Shape is the best fit for your riding style.
Camber is the tried and true standard for a snowboard profile. It is still the most popular camber style and will probably be around forever. A traditionally cambered board has a smooth arch underneath the middle of the board that comes down and touches the ground near the tip and tail when no additional weight is applied.
When a rider straps into a cambered board, the board flattens out on the snow and creates an evenly applied pressure to the edges. This camber profile provides explosive pop and response and is good for all types of riding. The Rocker profile has become extremely popular among freestyle riders and powder-hounds alike. This profile is the exact opposite of a traditional camber. It consists of a single central contact point that when weighted, flexes to create less edge contact on the tip and tail for easy pivoting action and all-day playfulness.
The rocker is also a more forgiving camber style when landing spins, jibs and other tricks. Less edge contact means less hang up on the lips and landings.
A Flat board profile is another great option for progressive riders. The completely flat shape is implemented from near the tip to near the tail and is a versatile design.
This profile has the forgiveness and butter-like characteristics of a rocker board, but with precise edging capabilities similar to that of a traditional camber. This camber profile is ideal for freestyle riding and is usually found in the park or street. There are a variety of board profile combinations out there. Snowboard companies are doing more and more experimentation with the construction of modern snowboards. Each company has their own name for their snowboard profile combinations and each profile has its own specific purpose and function.
Make sure to check out the manufacturers technical specifications for more details. You never know, you could find a new favorite.
0コメント